Mecal TT Bench Press

Crimping Machine

The TT Crimping Machine is a very compact and light, its spheroidal cast iron, one-piece structure offers the highest rigidity for a very stable crimping height values. The standard stroke is 40mm but other strokes are available.

Rigid cast iron frame for consistent crimping
Standard 40mm stroke – other strokes available
Industry standard shut height 135.8mm
Accepts all standard Miniapplicators

Technical Data:

Power: 0.55 KW
Force: 2000 Kg
Stroke: 40mm
Crimp Height: 135.8mm

Technical Data

Wire length, processing on both sides min:	1 mm
Wire length max:	800000 mm
Strip lengths, full stripping side 1 max:	115 mm
Strip lengths, full stripping side 2 max:	40 mm
Strip lengths, partial stripping/multiple stripping max:	999.9 mm
Wire outer diameter max:	10 mm
Flat cable width max:	12 mm
Automatic conductor detector:	no
Wire cross section min:	0.05 mm²
Wire cross section max:	10 mm²
Pieces max:	99999
Wire draw-in speed max:	4 m/s
Sequence processing (number of wires):	with TopWin
Length accuracy:	Repetition accuracy: ± (0.2% + 1.0)
Drive system:	Single rollers
Wire guide, side 1:	Swivel guide
Wire guide, side 2:	Fixed guide
Noise level:	< 80 dB
Wire protection/ground:	2 x 5 × 20 mm 6.3 A
Nominal output (average):	135 VA
Compressed-air connection:	5 – 8 bar
Operating pressure:	6 bar
Weight:	46 kg
Dimensions/length:	465 mm
Dimensions/width:	460 mm
Dimensions/height:	385 mm
Size of production table (L x W) min:	630 x 690 mm
Load capacity of production table min:	75 kg
Humidity, non-condensing:	90 %
Temperature operation:	10 – 40 °C
Processing outside the specifications:	Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.

Mecal TT Bench Press

Crimping Machine

Technical Data:

Request A Quote