Ew-06

Cable Cutter Wire Stripper

The programmable EW-06F stripping machine enables automated processing of wires with an outer diameter of up to 6.99 mm and a strip length of 48 mm. In addition, multi-core wires and multi-layer insulation can also be efficiently stripped with sequence processing in this machine.

Technical Data

Stripping Length: 0.5-48mm
Diameter Increments: 0.1mm
Capacity: 700-1200pcs/h (depends on wire material)
Wire Diameter: 1.13-6.99mm
Max Stripping Layer: 9 layers

Technical Data

Wire length, processing on both sides min:	1 mm
Wire length max:	800000 mm
Strip lengths, full stripping side 1 max:	115 mm
Strip lengths, full stripping side 2 max:	40 mm
Strip lengths, partial stripping/multiple stripping max:	999.9 mm
Wire outer diameter max:	10 mm
Flat cable width max:	12 mm
Automatic conductor detector:	no
Wire cross section min:	0.05 mm²
Wire cross section max:	10 mm²
Pieces max:	99999
Wire draw-in speed max:	4 m/s
Sequence processing (number of wires):	with TopWin
Length accuracy:	Repetition accuracy: ± (0.2% + 1.0)
Drive system:	Single rollers
Wire guide, side 1:	Swivel guide
Wire guide, side 2:	Fixed guide
Noise level:	< 80 dB
Wire protection/ground:	2 x 5 × 20 mm 6.3 A
Nominal output (average):	135 VA
Compressed-air connection:	5 – 8 bar
Operating pressure:	6 bar
Weight:	46 kg
Dimensions/length:	465 mm
Dimensions/width:	460 mm
Dimensions/height:	385 mm
Installation location:	Level, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min:	630 x 690 mm
Load capacity of production table min:	75 kg
Humidity, non-condensing:	90 %
Temperature operation:	10 – 40 °C
Processing outside the specifications:	Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
Hard, tough wires:	In the case of extremely hard, tough wires, processing may not be possible even within the cross section range. In case of doubt, WTS will be happy to provide processing samples of your wires.

Ew-06

Cable Cutter Wire Stripper

Technical Data

Request A Quote