EcoCut 100

Cutting Machine

The EcoCut 100 is designed to cut cables, hoses, flat strip lines and strands to a preset length. The machine can cut material with a thickness of max. 12 mm diameter and max. 100 mm width. Copper strands can be machined up to a cable cross section of 10 mm². The material is inserted into the machine and clamped by the operator. The machine automatically cuts the material, depending on the parameters set.

Technical Data

Wire Size Max: 10 mm2 copper wire
Material Thickness Min/Max: 0.1mm-12mm
Material Width Max: 100mm
Cutting Length: 0.1-99999 mm
Cutting Speed: 1.5m/s in 9 stages
Power Supply: 110V - 230V;50Hz/60 Hz; 120VA

Technical Data

Wire length, processing on both sides min:	1 mm
Wire length max:	800000 mm
Strip lengths, full stripping side 1 max:	115 mm
Strip lengths, full stripping side 2 max:	40 mm
Strip lengths, partial stripping/multiple stripping max:	999.9 mm
Wire outer diameter max:	10 mm
Flat cable width max:	12 mm
Automatic conductor detector:	no
Wire cross section min:	0.05 mm²
Wire cross section max:	10 mm²
Pieces max:	99999
Wire draw-in speed max:	4 m/s
Sequence processing (number of wires):	with TopWin
Length accuracy:	Repetition accuracy: ± (0.2% + 1.0)
Drive system:	Single rollers
Wire guide, side 1:	Swivel guide
Wire guide, side 2:	Fixed guide
Noise level:	< 80 dB
Wire protection/ground:	2 x 5 × 20 mm 6.3 A
Nominal output (average):	135 VA
Compressed-air connection:	5 – 8 bar
Operating pressure:	6 bar
Weight:	46 kg
Dimensions/length:	465 mm
Dimensions/width:	460 mm
Dimensions/height:	385 mm
Installation location:	Level, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min:	630 x 690 mm
Load capacity of production table min:	75 kg
Humidity, non-condensing:	90 %
Temperature operation:	10 – 40 °C
Processing outside the specifications:	Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.

EcoCut 100

Cutting Machine

Technical Data

Request A Quote