Kappa 315

Cut and Strip

The Kappa 315 cutting and stripping machine processes wires with a cross section of 0.05 mm² to 10 mm² thanks to the sturdy blade holder and various blade shapes.

The Kappa 315 has a strong and robust cutting head for processing wires with a conductor cross-section of 0.05 mm² to 10 mm². A wide variety of blades and wire guides can be changed without tools. The TopTouch user interface is designed for quick and easy programming of the machine. Programs can be generated and saved with just a few clicks. If it is necessary to connect the Kappa 310 to the company network, to extend it with feed, wire deposit systems, or if labelling on the wires is necessary, the Kappa machine can be expanded with options that make this possible.

Technical Data:

Wire length, processing on both sides min: 1mm
Wire length max: 800000mm
Strip lengths, full stripping side 1 max: 115mm

Strip lengths, full stripping side 2 max: 40mm
Strip lengths, partial stripping/multiple stripping max: 999.9mm
Wire outer diameter max: 10mm
Flat cable width max: 12mm

Technical Data

Wire length, processing on both sides min:	1 mm
Wire length max:	800000 mm
Strip lengths, full stripping side 1 max:	115 mm
Strip lengths, full stripping side 2 max:	40 mm
Strip lengths, partial stripping/multiple stripping max:	999.9 mm
Wire outer diameter max:	10 mm
Flat cable width max:	12 mm
Automatic conductor detector:	no
Wire cross section min:	0.05 mm²
Wire cross section max:	10 mm²
Pieces max:	99999
Wire draw-in speed max:	4 m/s
Sequence processing (number of wires):	with TopWin
Length accuracy:	Repetition accuracy: ± (0.2% + 1.0)
Drive system:	Single rollers
Wire guide, side 1:	Swivel guide
Wire guide, side 2:	Fixed guide
Noise level:	< 80 dB
Wire protection/ground:	2 x 5 × 20 mm 6.3 A
Nominal output (average):	135 VA
Compressed-air connection:	5 – 8 bar
Operating pressure:	6 bar
Weight:	46 kg
Dimensions/length:	465 mm
Dimensions/width:	460 mm
Dimensions/height:	385 mm
Installation location:	Level, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min:	630 x 690 mm
Load capacity of production table min:	75 kg
Humidity, non-condensing:	90 %
Temperature operation:	10 – 40 °C
Processing outside the specifications:	Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.

Kappa 315

Cut and Strip

Technical Data:

Request A Quote