us.warwickts.com

Kelvin Test Lead Set for Schleich Motor Analyser

Kelvin Test Lead Set for Schleich Motor Analyser A set of 4 leads for use with a Schleich motor analyser. The set consists of 3 leads connected to a Kelvin Alligator clip and leading to a pair of banana plugs. The other lead is an Earth lead with an Alligator clip connecting to a banana plug. All leads are 2m long and rated at 12A. Made with quality Electro PJP components these are a perfect set of leads to keep as additional or to replace old leads.

Pomona 6303 Double Banana Plug Kelvin Probe Set

Pomona 6303 Kelvin Probe Set The Pomona 6303 features double stacking banana plugs to kelvin test probes. The double banana plugs are stackable from the top or the sides. Consists of one Black and one Red test probe lead. This test probe configuration reduces the voltage drop in test leads, minimizing measurement inaccuracies, making them excellent for low resistance measurements. The probe tips are gold plated Beryllium Copper providing minimal contact resistance and are ideal for testing SMD and small components. Shielded RG174/U cable make up the leads to reduce any electrostatic interference. Probe Body: Outer Insulation- Gray Santoprene® Rubber Inner Insulation- Polypropylene, One Black, One Red Tip- Gold plated Beryllium Copper Banana Plug: Body- Gold Plated Brass Spring- Beryllium Copper, Gold Plated Insulation- Polypropylene, Color: One Black, One Red Cable: RG174/U Length: 48” (122cm), O.D. 0.100 (2,54mm) RATINGS:For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc.

Warwick Test Supplies Kelvin Alligator Clip 10A Lead Set

WKLS10 10A Kelvin Alligator Clip Lead Set The WKLS10 is a two lead Kelvin Clip Test Lead set designed to enable mill/ micro ohm measurement utilising the 4 wire measurement technique. The Kelvin Clip Crocodile/ Alligator clip has a maximum jaw opening of 41mm, capable of clamping items 32mm dia. The cable is PVC insulated 7.8mm O/D 2 core 300/500V and is available in 3, 5 and 10m lengths. The end of the cable is terminated with the highest quality gold plated straight banana plugs that will plug into LCR or Ohmeter equipment. Voltage Rating: 500V DC Current Rating: 10 A Use for 4 terminal measurement to eliminate lead resistance errors for milli and micro ohm measurement. View the Datasheet for more Information.

Warwick Test Supplies WKLS25 Large Kelvin Clip 25A Lead Set

Warwick Test Supplies WKLS25 25A Kelvin Alligator Clip Lead Set The WKLS25 is a two lead Kelvin Clip Test Lead set designed to enable mill/ micro ohm measurement utilising the 4 wire measurement technique. The Kelvin Clip Crocodile/ Alligator clip has a maximum jaw opening of 51mm, capable of clamping items 42mm dia. The cable is PVC insulated 7.8mm O/D 2 core 300/500V and is available in 3, 5, 10, 15 and 20m lengths. The end of the cable is terminated with the highest quality gold plated straight banana plugs that will plug into LCR or Ohmeter equipment. Voltage Rating: 500V DC Current Rating: 25 A Use for 4 terminal measurement to eliminate lead resistance errors for milli and micro ohm measurement.

Warwick Test Supplies WKLS-C C-Clamp Kelvin Clip Lead Set

Warwick Test Supplies WKLS-C C Clamp Kelvin Alligator Clip Lead Set The WKLS-C is a two lead Kelvin Clip Test Lead set designed to enable mill/ micro ohm measurement utilising the 4 wire measurement technique. The Kelvin C Clamp clip manually clamps on to the object under test and has a maximum clamping range of 47mm projecting 34mm. The cable is PVC insulated 7.8mm O/D 2 core 300/500V and is available in 3, 5, 10, 15 and 20m lengths. The end of the cable is terminated with the highest quality gold plated straight banana plugs that will plug into LCR or Ohmeter equipment. Voltage Rating: 500V DC Current Rating: 25 A Use for 4 terminal measurement to eliminate lead resistance errors for milli and micro ohm measurement.

PJP KITKELVIN-4931HA Kelvin Probe Test Lead Set

Electro PJP KITKELVIN-4931HA includes 2 leads and features 2 Kelvin Test Probes to 4 x 4 mm Banana Plugs The KITKELVIN-4931HA consists of two 4mm retractable shroud lantern tip Kelvin test probes connected with 150cm 0.75mm2 silicone cable to straight shrouded 4mm Banana plugs. Voltage Rating: CAT II 1000V AC, CAT II 1500V DC Current Rating: 15A DC Use for 4 terminal measurement to eliminate lead resistance errors for milli and micro ohm measurement. Ideal for use with a PV Tester.

5066-KELVIN-9050-100 Pair of Kelvin Alligator Clip 36A Test Leads 2m

5066-KELVIN-9050-100 Kelvin Alligator Clips to 4 Right-Angle 4 mm Banana Plugs The AWG13 cable is 100 cm in length and red/black in colour. The cable is 2.50 mm² and Silicone insulated. Voltage Rating of < 33 V AC < 70 V DC Current Rating 36 A Use for 4 terminal measurement to eliminate lead resistance errors for milli and micro ohm measurement. Useful test lead set for Automotive Diagnostics. Suitable replacement leads for Milli and Micro Ohmmeters, such as - Gossen Metrawatt Metrahit 27M, Gossen Metrawatt Metrahit 271, Seaward Cropico, BK Precison Model 310, Metrohm E1622

PJP 5066-KELVIN Pair of Kelvin Alligator Clip 10A Test Leads

The Electro PJP 5066-KELVIN includes 2 leads and features 2 Kelvin Alligator Clips to 4 Right-Angle 4 mm Banana Plugs The 0.50 mm² PVC insulated cable is 150 cm in length and red/black in colour. Voltage Rating of < 30 VAC < 60 VDC Current Rating 10 A Use for 4 terminal measurement to eliminate lead resistance errors for milli and micro ohm measurement. Useful test lead set for Automotive Diagnostics. Suitable replacement leads for Milli and Micro Ohmmeters, such as - Gossen Metrawatt Metrahit 27M, Gossen Metrawatt Metrahit 271, Seaward Cropico, BK Precison Model 310, Metrohm E1622

PJP 441 Kelvin Clips to 4 Plug Lead Set

Electro PJP 441 - Kelvin Clips to Straight 4mm Banana Plugs. Kelvin Clips to 4 straight gold plated banana plugs using PVC 0.22 mm² cable. Designed for accurate 4 wire LCR/ resistance measurement. Compatible with most 4 wire test instruments including those from Fluke, Keithley, Amprobe, Extech, BK Precision etc. max. current: 1 A max. temperature: 50 °C max. voltage: 33 V AC / 70 V DC length: 77 cm

5066-9010-KELVIN Pair of Kelvin Alligator Clip 10A Test Leads 3m

5066-9010-KELVIN-300 includes 2 leads and features 2 Kelvin Alligator Clips to 4 Right-Angle 4 mm Banana Plugs - 3m The 0.75 mm² PVC insulated cable is 300 cm in length and red/black in colour. Voltage Rating of < 30 VAC < 60 VDC Current Rating 10 A Use for 4 terminal measurement to eliminate lead resistance errors for milli and micro ohm measurement. Useful test lead set for Automotive Diagnostics. Suitable replacement leads for Milli and Micro Ohmmeters, such as - Gossen Metrawatt Metrahit 27M, Gossen Metrawatt Metrahit 271, Seaward Cropico, BK Precison Model 310, Metrohm E1622

PJP 431 Kelvin Clip SMD Tweezer to BNC Plug Lead

The Electro PJP 431 Kelvin Tweezer to Male BNC Lead The 431 Kelvin SMD Tweezer has been designed specifically to eliminate/minimise wire resistance when measuring small SMD components. It consists of RG174/U cable, 100cm in length with a red/black tweezer capable of opening to a maximum of 17mm with gold contact parts. Voltage Rating of < 33 V AC < 70 V DC Current Rating 1 A

PJP 440 Kelvin Alligator Clips Lead Set with Ground

Electro PJP 440 Kelvin Alligator Clips to Straight 4mm Banana Plugs with additional Ground cable. Designed for accurate 4 wire mili ohm resistance measurement. Compatible with most 4 wire test instruments including those from Fluke, Keithley, Amprobe, Extech, BK Precision etc. Alligator clips are attached to 100 cm RG174 0.50 mm² PVC insulated cable and wrapped in braid for protection. Voltage Rating of < 33 V AC < 70 V DC Current Rating 1 A

5066-KELVIN-9050-200 Pair of Kelvin Alligator Clip 36A Test Leads 2m

5066-KELVIN-9050-200 Kelvin Alligator Clips to 4 Right-Angle 4 mm Banana Plugs The AWG13 cable is 200 cm in length and red/black in colour. The cable is 2.50 mm² and Silicone insulated. Voltage Rating of < 33 V AC < 70 V DC Current Rating 36 A Use for 4 terminal measurement to eliminate lead resistance errors for milli and micro ohm measurement. Useful test lead set for Automotive Diagnostics. Suitable replacement leads for Milli and Micro Ohmmeters, such as - Gossen Metrawatt Metrahit 27M, Gossen Metrawatt Metrahit 271, Seaward Cropico, BK Precison Model 310, Metrohm E1622

PJP 432 Kelvin Alligator Clip Test Lead

The Electro PJP 432 Kelvin Alligator Clips to Right-Angle 4 mm Banana Plugs Lead - 20 A Used for accurate LCR and low resistance measurement using an LCR multimeter or milli/ micro ohmmeter. The kelvin alligator clip has both jaws insulated from each other attached to an 0.50 mm² PVC insulated cable of 100 cm in length. The lead ends are red/black in colour with right angled banana plugs to fit into a meter or test equipment. Voltage Rating of < 30 VAC < 60 VDC Current Rating 1 A

PJP 430 SMD Kelvin Tweezer Lead Set

Electro PJP 430 Kelvin SMD Tweezer Lead Set The PJP 430 Kelvin Clip SMD Tweezer has been designed specifically to eliminate/minimise wire resistance when measuring small SMD components. It consists of RG174/U cable + silicone 0.22 mm² test lead, 100cm in length with a red/black tweezer capable of opening to a maximum of 17mm with gold contact parts. Voltage Rating < 33 V AC < 70 V DC Current Rating 1 A View the Datasheet for more information.

Pomona 6730 Wide Jaw Kelvin Clip Set

Pomona 6730 Kelvin Clip Lead Set with Wide Jaw Kelvin Clips Replacement BS K-Clip Kelvin Clip Set for Aim-TTi. Ideal for use with the BS407 Precision Micro Ohmmeter Standard banana plugs with retractable sheath allows versatility in connecting to the equipment. Gold plated alligator clips that open 20.3 mm wide. 100 cm silicone test leads Voltage Rating 1000 V CAT IIIView the Datasheet for more Information.